Capturing the Moment

Search This Blog

Valley In the Lakes

on October 04, 2017

Get link
Facebook
X
Pinterest
Email
Other Apps

Painted this "Valley in the Lakes" to try out a technique of beginning an acrylic with a white thick sky into which I introduce colours while wet and blend a little. Quite successful despite the fast drying time of acrylic. Colours were Ultramarine, burnt umber, paynes grey and cadmium yellow.

Get link
Facebook
X
Pinterest
Email
Other Apps

Comments

DIY Absorbent Ground

I decided I wanted to use my oil paints over a wax resist on paper that I could etch into, but how to protect the paper??? I needed a ground, but not acrylic gesso as its not absorbent enough and I also want to use that as a partial resist later on. Golden Absorbent Ground is expensive and I only want to experiment so I decided to make my own. Link to video This is my first test, its a mixed media miniature on poor quality paper roughly coated with my DIY absorbent ground. Link to video Here's the results of the second test with two coats on shiny card. This gives a real surface to paint on, otherwise impossible on the shiny card. Link to video

A watercolour painted on shiny card primed with absorbent ground

I coated a piece of shiny cereal packet card with several coats of absorbent ground to see if it would take watercolour paint well. I painted a view of Brownsea Island in Poole Harbour. I was able to create texture effects in the ground prior to paintng which was an interesting idea. Here's the video

Ray Balkwill Watercolour Exercise from his book by Gabriella

Exercise from 'painting landscapes with atmosphere' by Ray Balkwill'. I used a lemon yellow with a cadmium yellow and a raw sienna. Blues were winsor and manganese and reds were a rose and a cadmium. I painted this at too small a scale really and mention the improvements at end of video Link to my video

G Smith